SHC Smart Head 8 Channel Controller
The New State of the art Smart Head Gas Monitoring System monitors, records, remembers, warns and advises if it needs replacement.
Conspec’s Smart Head Controller is smarter than your average monitor, because its digital, yet, there is less complexity with greater reliability. Conspec’s Smart Head Controller has been designed to reduce cost and equipment redundancy when several gasses are monitored at a specific location. Material cost is reduced by separating the Sensor from the Monitoring Device. Conspec’s Smart Head Controller can interface with up to eight Smart Head Sensors, each reading a different gas.
Conspec’s Smart Head Monitor stores all important operating parameters, available from a connection to a local computer, which enables management to plan maintenance rather than respond to a perhaps critical sensor failure, as with monitors which use an analog signal.
***Consult Factory for Other Sensors, Gases & Ranges***
***For Single Channel Gas Detection, contact us about our Smart Head Monitor***
Specifications
| Enclosure Type | NEMA 4X/ IP66 Nylon & Stainless Steel Enclosure | Optional Power | |
|---|---|---|---|
| Power Input | 12-24VDC | Audible Alarm | |
| Dimensions | 7.5" x 5" x 3" / 19.1cm x 12.7cm x 7.6cm | Operating Temp | 14°F to 120°F (-10°C to 50°C) |
| Display | 3.5" (9cm) LCD Display | Fuse | |
| Response Time | Sensors | Electrochemical, Infrared, Photo-Ionization Detector |
Features
- Plug & Play Sensors
- PC Based Software for Remote Configuration
- A Clear & Back-lit LCD Display
- Bright LED Status Indicators
- Long Sensor Life
- Automatic Reset after Power Loss/Interruption
- Temperature & Humidity Compensated
- High Immunity to RFI &EMI
- One Year Limited Warranty
- Low Cost
- Industry Standard Output Signal
- Supports Several Gas Sensing Technologies
- Low Power Consumption
- Increased Accuracy in Fault Finding
- Plate Mounted, Holes for Suspension, Grooves for Slot Usage
- Reduced Signal Noise as Signal is Digitized at Source
- Output Signal: RS-485 or Conspec Legacy, 4 Open Collector Digital Output, ***Coming Soon - HART Communications Protocol Optional***
- Real Time Sensor Cell Analysis with Lifetime Sensor Records
- Keypad: 4 Button Keypad or Infrared Remote Control
- Temperature Compensated Sensor Readings
- Preventative Maintenance Condition Monitoring
- Reliable & Stable Operation
- 3.5 lbs. / 1.6 kg
- Conduit Entry: One (.75" Cable Grip)
- Current Consumption: 50mA Full Scale
- Modes: Two (Calibration & Normal)
- Alarm Set Point #1: User Defined
- Alarm Set Point #2: User Defined
- Alarm Set Point #3: User Defined
- Remote Configuration: PC Software
- Temperature Compensation: Full Temperature Range
- Operating Humidity: 10% to 95% RH Non-Condensing
- Cable Requirements: 4-Conductor 18 AWG Suggested
- Status LEDs: Green - Power; Red Alarm; Yellow Fault; Green Comm.
Applications
- Mining
- Oil & Gas
- Petrochemical Exploration
- Refineries
- Power/Co-Generation Plants
- Chemical Processing
- Plastics
- Pharmaceutical Labs
- Medical
- Wastewater Treatment Plants
- Water Treatment Facilities
- Pulp & Paper Mills
- Semiconductor Manufacturing
- Glass Manufacturing
- Tank Farms
- Greenhouses
- Industrial Agriculture Facilities
- Food Processing
- Breweries/Wineries/Distilleries
- Manufacturing
- Factories/Warehouses
- Construction
- Telecommunications
- Battery Charging Stations
- Fuel Cell Storage
- Boiler/Generation Rooms
- Automotive Facilities
Options and Replacement Parts
| SHS01 Ammonia | SHS02 Carbon Dioxide |
| SHS03 Carbon Monoxide | SHS04 - Chlorine |
| SHS05 Combustibles | SHS06 Hydrogen |
| SHS07 Hydrogen Chloride | SHS08 Hydrogen Sulfide |
| SHS09 Nitric Oxide | SHS10 Nitrogen Dioxide |
| SHS11 Oxygen | SHS12 Ozone |
| SHS13 Sulfur Dioxide | SHS14 Volatile Organic Compounds |
| SHS97 Refrigerants(R-22, R-134a) | UP99 Hand-Held IR Programmer/Calibrator |
| P1879 Calibration Kits | P1880 Calibration Gas |
