SHM Smart Head Monitor
The New State of the art Smart Head Gas Monitoring System monitors, records, remembers, warns and advises if it needs replacement.
Conspec’s Smart Head Monitor is smarter than your average monitor, because its digital, yet, there is less complexity with greater reliability.
Conspec’s Smart Head Monitor communicates over the most widely used protocol: Modbus RTU. Modbus RTU open protocol is a widely used, rugged and a very secure industrial communications protocol.
Conspec’s Smart Head Monitor stores all important operating parameters, available from a connection to a local computer, which enables management to plan maintenance rather than respond to a perhaps critical sensor failure, as with monitors which use an analog signal.
***Consult Factory for Other Sensors, Gases & Ranges***
***For Multi-Channel Gas Detection, contact us about our Smart Head Controller***
Specifications
| Enclosure Type | NEMA 4X/IP66 Nylon & Stainless Steel Enclosure | Optional Power | |
|---|---|---|---|
| Power Input | 12-24VDC | Audible Alarm | |
| Dimensions | 7.5" x 5" x 3" / 19.1cm x 12.7cm x 7.6cm | Operating Temp | 14°F to 120°F (-10°C to 50°C) |
| Display | 3.5" (9cm) LCD Display | Fuse | |
| Response Time | Sensors | Electrochemical, Infrared, Photo-Ionization |
Features
- Low Power Consumption
- Industry Standard Output Signal (Modbus RTU Protocol)
- Supports Several Gas Sensing Technologies (Infra-red, Photo-ionization, Electrochemical)
- Reduced Signal Noise as the Signal is Digitized at Source
- Temperature Compensated Sensor Readings
- Superior Accuracy in Fault Finding
- Real Time Sensor Cell Analysis with Lifetime Sensor Records
- Preventative Maintenance Condition Monitoring
- Reliable & Stable Operation
- PC Based Software for Remote Configuration
- A Clear & Back-lit LCD Display
- Bright LED Status Indicators
- Long Sensor Life
- Automatic Reset after Power Loss/Interruption
- Temperature & Humidity Compensated
- One Year Limited Warranty
- Weight: 3 lbs / 1.6 kg
- Mounting: Plate Mounted, Holes for Suspension, Grooves for Slot Usage.
- Conduit Entry: One (.75" Cable Grip)
- Temperature Compensation: Full Temperature Range
- Operating Humidity: 10% to 95% RH Non-Condensing
- Cable Requirements: 4-Conductor 18 AWG Suggested
- Current Consumption: 50mA Full Scale
- Output Signals:Mobdus RTU on RS-485 or Conspec Legacy, 4 Open Collector Digital Output, Linear 4-20mA Analog; HART Communication Protocol Optional
- Keypad: 4 Button Keypad or Infrared Remote Control
- Modes: Two (Calibration & Normal)
- Status LED’s: Green - Power; Red Alarm; Yellow Fault; Green Comm.
- Alarm Set Point #1: User Defined
- Alarm Set Point #2: User Defined
- Alarm Set Point #3: User Defined
- Remote Configuration: PC Software
Applications
- Mining
- Oil & Gas
- Petrochemical Exploration
- Refineries
- Power/Co-Generation Plants
- Chemical Processing
- Plastics
- Pharmaceutical Labs
- Medical
- Wastewater Treatment Plants
- Water Treatment Facilities
- Pulp & Paper Mills
- Semiconductor Manufacturing
- Glass Manufacturing
- Tank Farms
- Greenhouses
- Industrial Agriculture Facilities
- Food Processing
- Breweries/Wineries/Distilleries
- Manufacturing
- Factories/Warehouses
- Construction
- Telecommunications
- Battery Charging Stations
- Fuel Cell Storage
- Boiler/Generation Rooms
- Automotive Facilities
Options and Replacement Parts
| SHM01 Ammonia | SHM02 Carbon Dioxide |
| SHM03 Carbon Monoxide | SHM04 Chlorine |
| SHM05 Combustibles | SHM06 Hydrogen |
| SHM07 Hydrogen Chloride | SHM08 Hydrogen Sulfide |
| SHM09 Nitric Oxide | SHM10 Nitrogen Dioxide |
| SHM11 Oxygen | SHM12 Ozone |
| SHM13 Sulfur Dioxide | SHM14 Volatile Organic Compounds |
| UP99 Hand-Held IR Programmer/Calibrator | P1879 Calibration Kits |
| P1880 Calibration Gas |
