SHN Smart Head Wireless Transmitter (MineTrax)
The New State of the art Smart Head Gas Monitoring System monitors, records, remembers, warns and advises if it needs replacement.
Conspec’s Smart Head Battery Powered Transmitter is smarter than your average monitor, because its digital, yet, there is less complexity with greater reliability. Conspec’s Smart Head Battery Powered Transmitter communicates over the Minetrax wireless MESH Network, a reliable and cost-effective solution for mobile data communications and RFID tracking in environments where the installation of wires for power and communications is problematic. Conspec’s Smart Head Battery Powered Transmitter stores all important operating parameters, available from a connection to a networked computer, which enables management to plan maintenance rather than respond to a perhaps critical sensor failure, as with monitors which use an analog signal.
***Consult Factory for Other Sensors, Gases & Ranges***
***For Fixed Mounted Single & Multi-Channel Gas Detection, contact us about our Smart Head Monitors and Controller***
Specifications
| Enclosure Type | NEMA 4X/IP66 Enclosure | Optional Power | |
|---|---|---|---|
| Power Input | 3.6 VDC | Audible Alarm | |
| Dimensions | 4.75" x 4.75" x 8" / 12.1cm x 12.1cm x 20.3cm | Operating Temp | -4°F to 120°F (-20°C to 50°C) |
| Display | Fuse | ||
| Response Time | Sensors | Electrochemical, Mechanical |
Features
- Low Power Consumption Battery Life Exceeds 40 Days on a Single D-cell Battery
- Powered by MineTrax Wireless Network Module
- Supports Several Gas Sensing Technologies
- Reduced Signal Noise as the Signal is Digitized at Source
- Temperature Compensated Sensor Readings
- Superior Accuracy in Fault Finding
- Real Time Sensor Cell Analysis with Lifetime Sensor Records
- Preventative Maintenance Condition Monitoring
- Reliable & Stable Operation
- PC Based Software for Configuration & Calibration
- Bright LED Status Indicators
- Long Sensor Life
- Automatic Reset after Power Loss/Interruption
- High Immunity to RFI &EMI
- One Year Limited Warranty
- Weight: 2 lbs / 0.9 kg
- Mounting: Plate Mounted
- Temperature Compensation: Full Temperature Range
- Operating Humidity: 10% to 95% RH Non-Condensing
- Cable Requirements: None
- Current Consumption: 5mA Average
- Output Signals: Mesh Network Powered by Minetrax Wireless Communication Module
- Status LEDs: Dual Colors
- Alarm Set Point #1: User Defined
- Alarm Set Point #2: User Defined
- Alarm Set Point #3: User Defined
- Remote Configuration: PC Software
Applications
- Mining
- Oil & Gas
- Petrochemical Exploration
- Refineries
- Power/Co-Generation Plants
- Chemical Processing
- Plastics
- Pharmaceutical Labs
- Medical
- Wastewater Treatment Plants
- Water Treatment Facilities
- Pulp & Paper Mills
- Semiconductor Manufacturing
- Glass Manufacturing
- Tank Farms
- Greenhouses
- Industrial Agriculture Facilities
- Food Processing
- Breweries/Wineries/Distilleries
- Manufacturing
- Factories/Warehouses
- Construction
- Telecommunications
- Battery Charging Stations
- Fuel Cell Storage
- Boiler/Generation Rooms
- Automotive Facilities
Options and Replacement Parts
| MT Minetrax Terminal | MR Minetrax Repeater |
| SHW01 Ammonia | SHW03 Carbon Monoxide |
| SHW04 Chlorine | SHW06 Hydrogen |
| SHW07 Hydrogen Chloride | SHW08 Hydrogen Sulfide |
| SHW09 Nitric Oxide | SHW10 Nitrogen Dioxide |
| SHW11 Oxygen | SHW12 Ozone |
| SHW13 Sulfur Dioxide | SHW98 Air Flow (coming Winter/Spring 12) |
| SHW99 Mini Weather Station (Humidity, Barometric Pressure & Temperature) | P1879 Calibration Kits |
| P1880 Calibration Gas | TDTL-5930/S Replacement Battery |
