The OPTIO XP wireless multi gas detector (up to 6 gases) eliminates costly wire installation and provides a massive coverage area when used with remote sensors. Avoid the cost of purchasing and installing multiple detectors with Conspec’s all-in-one solution.
The OPTIO XP wireless multi gas detector provides detection coverage for up to 6 sensors and communicates wirelessly to an OPTIO XP configured gateway. The OPTIO XP gateway outputs consist of 4 dry relay contacts & Modbus RTU over RS-485 communications giving your wireless gas detection network the capability to control alarming or process systems.
Optional remote sensors can be wired up to 100 ft. giving the detection system a huge coverage area when using multiple sensors.
Carbon Monoxide CO
Methane CH4
Hydrogen
Hydrogen Sulfide H2S
Nitrogen Dioxide NO2
Carbon Dioxide CO2
Oxygen O2
Chlorine CL2
Ammonia NH3
Ozone O3
Nitric Oxide NO
Propane C3H8
Hydrogen Cyanide HCN
Hydrogen Chloride HCL
Sulfur Dioxide SO2
VOCs (Volatile Organic Compounds)
Contact Conspec to inquire about gases not listed.
32 Wireless Detectors per Gateway
Up to 6 Sensors per Detector
Remote Sensors up to 100′
Minimal Wireless Network Setup
For Use in Classified Areas
Easy to Use Interface with Infrared Remote
The OPTIO XP is a wireless multi gas detector that eliminates costly wire installation while providing detection for up to 6 different gases simultaneously. Unlike traditional wired systems, the OPTIO XP communicates wirelessly to a configured gateway, reducing installation time and costs. It can also connect remote sensors up to 100 feet away, creating a massive coverage area that would typically require multiple separate detectors.
The OPTIO XP starts at $1,321.00. While the initial cost may seem higher than single-gas detectors, it’s actually more cost-effective because it replaces the need for multiple individual detectors. With up to 6 sensors per unit and the ability to support 32 wireless detectors per gateway, you can create a comprehensive gas detection network without the expense of running cables or installing numerous separate devices.
The OPTIO XP can detect 16 different gases including Carbon Monoxide (CO), Methane (CH4), Hydrogen (H2), Hydrogen Sulfide (H2S), Nitrogen Dioxide (NO2), Carbon Dioxide (CO2), Oxygen (O2), Chlorine (CL2), Ammonia (NH3), Ozone (O3), Nitric Oxide (NO), Propane (C3H8), Hydrogen Cyanide (HCN), Hydrogen Chloride (HCL), Sulfur Dioxide (SO2), and Volatile Organic Compounds (VOCs). Additional gas configurations are available by contacting Conspec sales for specific applications.
The OPTIO XP uses a wireless network that supports up to 32 detectors per gateway with minimal setup requirements. The gateway provides 4 dry relay contacts and Modbus RTU over RS-485 communications, allowing integration with existing alarm systems and process control equipment. This setup enables automated responses to gas detection events and remote monitoring capabilities across large facilities.