D1xCP1-PS Explosion Proof Manual Pull Station

The D1xCP1-PS is a cast aluminium manual alarm pull station available in a dual action configuration. These explosion proof stations have a DPDT switch mounted in heavy duty cast aluminium housings.

es2 safety badges es2 safety badges es2 safety badges
The solid design and rugged construction of the D1xCP1-PS station makes it ideal for use in harsh operating environments and hazardous locations. The D1xCP1-PS manual station is UL listed for use in the various classifications of hazardous environments shown in the specification table. The device has a NEMA type 4X rating for operation in extreme weather conditions and plant wash down applications. It is also UL Marine listed for operation in highly corrosive environments. The D1xCP1-PS is the E2S Warning Signals designation for the SGX-32 Pull Station as manufactured by SigCom.
Datasheet Datasheet.pdf
Installation Manual D1xCP1-PS_Installation.pdf
FM certificate FM_CoC_D1xCP1.pdf
UL certifcate of compliance UL_CoC_-_20121030-E192508_D1xCP1.pdf
2D drawing (PDF) D1xCP1-PS_2D_Drwg.pdf
Nameplate Drawing D241-09-001_Issue_1_D1xCP1-PS.pdf
Lo-res product image 1 (JPG) D1xCP1-PS.jpg

The D1xCP1-PS dual action model features a “PUSH” bar that moves inward, allowing the “PULL” handle to be grasped and operated by a single hand. The activated station is reset by opening the station with a key, placing the handle in the normal upright position, and re-locking the station.

  • Explosion Hazard Classifications Class I, Div. 1, Group B, C and D Class II, Div. 1, Group E, F and G Class III, Div. 1 (FM)
  • Marine and NEMA type 4X Rated
  • DPDT switch with screw terminal connection
  • Dual Action
  • DC and AC Voltage Contact Ratings
  • Key Reset
Listings: UL, MEA
Temperature: -40°C to +65°C [-40° to 150°F]
Relative humidity: 95% at 20°C [68°F]
Switch Type: Double Pole, Double Throw (DPDT)
Switch Rating: 1 Amp @ 30 VDC
10 Amp @ 120 VAC
IP Rating: NEMA Type 4X (UL)
Other: UL Marine Listed
Pull Station Weight: 4.8 lbs
Pull Station Dimensions: 6 5/16”h x 3 1/4”w x 3 7/8”d
Conduit Fittings: Two – 3/4” – 14 NPT
Colour: Red with raised white letters
white “PULL” bar and white “PUSH” bar
(Dual Action) with raised red letters
Version: Part code:
Product type: D1XCP1PS D1xCP1-PS Manual Pull Station
Switch Type: [s] D DPDT/DPCO
Cable entries: [e] D 2 × 3/4" NPT
Stopping plug: [m] X
None (default)
1 x Nickel Plated Brass
Duty label / Equipment tag: [d]: 1
No Duty label, no Equip. tag
Duty label Stainless Steel
Duty label St/St + Equip. tag
Equip. tag only
Special label requirement
Version: [v] A1 UL
Enclosure colour: [x] R Red
Full code: D1XCP1PSDDX1A1R

Contact us
to discuss your gas detection needs today!

800-487-8450 or Click Here